1/4/2024 0 Comments Istream no sources 2017![]() The OpenWRT config script is /lib/netifd/proto/qmi.sh which hints that the following config parameters are available: proto_qmi_init_config() ' sudo uqmi -d /dev/cdc-wdm0 sudo uqmi -d /dev/cdc-wdm0 -get-current-settings I have found uqmi to be helpful, though it is different from the typical qmicli on "desktop" systems. I'm far from an expert on these devices as I'm still in the process of trying to figure out why I'm not getting an IPv6 address on my SIM7100A. The sim card I'm using in this modem works fine in my smartphone, and I've been using USB tethering to the USB port of the router with no issues.ĭo you have any idea about what I could do here? In either case there was no connection to the Internet, all pings to known servers failed. I also tried to do manually with this guide and and what I read in the wiki.Īnd the output was the same, but at least I got that the RX number was very slowly rising, I was receiving one packet per 30 seconds or so. Sun May 27 09:47:50 2018 daemon.notice netifd: qmi_wwan0_4 (4044): udhcpc: sending discoverīy comapring it to the output in this bug report (which is not a bug) it seems that my modem isn't getting an IP address from the LTE side.Īlso in the Interfaces page in Luci I see that this interface has TX that increases slowly (I assume these are the dhcp requests), while RX remains 0 (i.e. Sun May 27 09:47:47 2018 daemon.notice netifd: qmi_wwan0_4 (4044): udhcpc: sending discover Sun May 27 09:47:46 2018 dnsmasq-dhcp: read /etc/ethers - 0 addresses Sun May 27 09:47:46 2018 dnsmasq: read /etc/hosts - 4 addresses Sun May 27 09:47:44 2018 user.notice firewall: Reloading firewall due to ifup of qmi_wwan0 (wwan0) Sun May 27 09:47:44 2018 daemon.notice netifd: qmi_wwan0_4 (4044): udhcpc: sending discover Sun May 27 09:47:43 2018 daemon.notice netifd: Interface 'qmi_wwan0_4' is setting up now Sun May 27 09:47:43 2018 daemon.notice netifd: Interface 'qmi_wwan0_4' has link connectivity Sun May 27 09:47:43 2018 daemon.notice netifd: Network alias 'wwan0' link is up ![]() Sun May 27 09:47:43 2018 daemon.notice netifd: Network device 'wwan0' link is up Sun May 27 09:47:43 2018 daemon.notice netifd: Interface 'qmi_wwan0' is now up Sun May 27 09:47:43 2018 daemon.notice netifd: Interface 'qmi_wwan0_4' is enabled Sun May 27 09:47:43 2018 daemon.notice netifd: qmi_wwan0 (3998): Starting network qmi_wwan0 Sun May 27 09:47:43 2018 daemon.notice netifd: qmi_wwan0 (3998): Waiting for network registration This is logs of what happens when I click on "connect" button on this interface (called "qmi_wwan0" ) Sun May 27 09:47:43 2018 daemon.notice netifd: qmi_wwan0 (3998): "Unknown error" ![]() I've used LuCi and the QMI protocol in it to configure the thing. Std::ofstream outStream("some\\path.Hi everyone, I'm trying to run a Quectel EC25-E (I'm in europe so this is the right modem) over QMI protocol. Std::string gltfJson = Serialize(gltfDoc, SerializeFlags::Pretty) serialize and write new gltf json showing the json structure originally hidden in GLB get json from GLB and deserialize into GLTFDocument GLBResourceReader reader(*streamReader, glbStream) Std::shared_ptr GetInputStream(const std::string&) const overrideĪuto glbStream = std::make_shared("some\\path.glb", std::ios::binary) InStream() : m_stream(std::make_shared(std::ios_base::app | std::ios_base::binary | std::ios_base::in | std::ios_base::out)) It supports files containing extensions and extras, allows easy direct reading of any model information into vectors of any desired bit size, and has built-in compliance validation of files during deserialization. ![]() Designed for flexibility and ease of integration into 3D engines. GLTFSDK is a fully compliant Deserializer/Serializer for GLTF, GLB and Base64 encoded GLTF files, implemented in C++ 11. Flexibility and ease of integration to any 3D engine.Simple interface for reading any model information automatically converted to any bit size.Built-in compliance validation during deserialization.Can ingest GLB/GLTFs as well as GLTFs with embedded Base64.Fully compliant with KhronosGroup GLTF 2.0 spec.Fixed GLB serialization so empty buffers are not written. ![]() Fixed copyright notice to comply with MS standards.NOTE: This package is outdated and there are no plans to release newer versions using NuGet, please go to to download the latest source code. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |